13549213581  肖生

薄膜, 电子电缆护套材料, 电气/电子应用领域, 粘合

DeWAL D/W 200

聚四氟乙烯

DeWAL Industries

 

产品说明

 

D/W 200 is skived from a modified homopolymer PTFE resin containing a higher level of a fully fluorinated comonomer than is in our 220 film. The incorporation of the comonomer yields a material with improved electrical and physical properties. This film can be thermally bonded (fused) to itself (625 - 650 degrees F). The modified homopolymer resin exhibits chemical resistance equivalent to that of homopolymer PTFE. Its tensile strength is approximately 25% higher, and the elongation is approximately 60% higher than for homopolymer PTFE. Because of these properties D/W 200 is often a good substitute for melt Processable films such as PFA.

 

D/W 200 may be thermally fused to itself making possible the fabrication of structures requiring these properties. D/W 200 can also be used as a high dielectric strength fusible wrap in electrical and electronic cable applications. It can also be used as a bonding film in the circuit board industry.

 

总体

 

材料状态 • 已商用：当前有效

供货地区 • 北美洲 • 欧洲

性能特点 • 均聚物 • 良好的电气性能 • 耐化学性良好

用途 • 薄膜 • 电子电缆护套材料

• 电气/电子应用领域 • 粘合

形式 • 薄膜

 

物理性能 额定值单位制

Thickness 12.7 到 1570nm

薄膜 额定值单位制 测试方法

抗张强度 - MD (屈服) 41.4MPa ASTM D882

伸长率 - MD (断裂) 500% ASTM D882

热性能 额定值单位制

最高连续使用温度 260°C

电气性能 额定值单位制 测试方法

介电强度 110kV/mm ASTM D149

补充信息 额定值单位制

Backing Material PTFE Film

Core ID 7.62cm

Maximum Roll OD 356mm

Width 25.4 到 914mm

 

备注

1 一般属性：这些不能被视为规格。

 

 

 

 

 

 

注塑级聚四氟乙烯 DeWAL Industries 注塑级PTFE   PTFE  DeWAL D/W 200塑料是东莞市双帮塑胶原料有限公司常年销售的塑料，因为塑料价格行情每天都有新变化前天的报价不等于今天的报价。本公司销售的所有原料保证是原厂原包,随料可以提供生产厂商提供的物性表、SGS报告，COA原料出厂报告,UL黄卡,ROSH报告,reach报告,SVHC报告,提供原料注塑加工工程中可能出现的各种异常现象解决方法，塑料牌号太多，本网站没有提供的本公司也有代理，详情请咨询本公司相关业务人员0769-87795123

 

13549213581  肖生